Atsargumo priemonės įrengiant aukšto slėgio žarnos jungtis

(1) The hose cannot be bent excessively during movement or at rest, nor can it be bent at the root, at least 1.5 times its diameter;

(2) When the hose is moved to the extreme position, it should not be pulled too tight, and it should be loose;

(3) Try to avoid torsional deformation of the hose;

(4) The hose should be as far away as possible from the heat radiation member, and it is necessary to wear a heat insulation board;

(5) Reikėtų vengti išorinių žarnos pažeidimų, tokių kaip ilgalaikė - trintis to paties naudojamo elemento paviršiuje.

(6) If the hose is excessively deformed due to its own weight, there should be supporting parts.